- 給力跌落測試儀，跌落試驗機詳細介紹！
- 產品名稱：跌落試驗機跌落試驗機產品簡介：
手機跌試驗機適用于手機、機聽筒、對講機、MP3、CD、電子詞典等小型電子消費類產品作重復跌落測試。跌落試驗機 工作原理：升降氣缸帶動上夾具（氣手指）下降將手機夾住，上升，松開氣手指，手機成自由跌落運動，此時雙動氣缸伸縮將手機推至上夾具能夾住之位置，升降氣缸帶動上夾具（氣手指）下降將手機夾住，上升，樺開氣手指，手機成自由跌落運動，如此反復直至設定次數。跌落試驗機 技術參數：手機跌試驗機跌落高度：70~150mm可調節手機跌試驗機跌落方式：氣動式測試工位：三個工位手機跌試驗機跌落次數：0~20次/min可設定沖擊地板：A3鐵板手機跌試驗機控制方式：PLC觸摸屏控制手機跌試驗機電源：220V/50HZ
- 跌落試驗機 特點：手機跌試驗機可設定次數自動停止跌落表面材料：鋁，厚度為12mm。跌落處采用六個復位氣缸。提示功能：能設定按鍵次數定值，可自動停止測試。手機跌試驗機采用SMC無桿氣缸作為手機提起、跌落驅動源，配以精密雙動氣缸作歸位動作，耐久使用；能實現手機等產品反復跌落，以檢測產品由一定高度落下之耐沖擊性；手機跌試驗機由于采用氣動組件及專制控制方式，極大地提升測試速度和一致性；采用松下液晶觸摸式控制屏+PLC可編程控制器作動作程控；獨立計數，到達設定次數自動停止測試以上為標準機型的參數，如果您有特殊要求，我們會按照您的要求給您設計Z適合的方案。若您需要更詳細的了解壽命試驗機、冷熱沖擊試驗箱、恒溫恒濕箱等產品資料，
請您我們的： ; 歡迎您的來電！
可登陸產品：！
給力跌落測試儀，跌落試驗機詳細介紹！英語版塊：
To force drop tester, drop test enginery detailed introduction.
Product name: drop test enginery
Drop test enginery product introduction:
phones used in phones, fall test enginery ephone handle, intercom, MP3, CD, electronic dictionary electronic consumer products such as small as repeat fall test.
Drop test enginery principle:
Lifting cylinder driving on the fixture （gas finger） decline will phone clamp, rise, loosen the gas fingers, phone into free fall movement, this time the double acting cylinder expansion will push the first phone can clip fixture living position, lifting cylinder driving on the fixture （gas finger） decline will phone clamp, rise, birch KaiQi fingers, phone into free fall movement and so on and so on until the setting number.
Drop test enginery technology parameters:
phone down test enginery drop height: 70 ~ 150 mm is adjustable
phone down test enginery fell way: pneumatic type
Test station: three points
phone number fell down tester: 0 ~ 20 times/min can be set
Impact floor: the A3 iron plate
phone down test enginery control mode: PLC touch screen control
phone down test enginery power: 220 V/frequency 50 HZ
Drop test enginery features:
phone number can be set down test enginery automatically stop
Drop the surface materials: aluminum, thickness of 12 mm. In the fall the six reset of the cylinder.
Prompt functions: can set the number keys setting value, automatic stop testing.
phones using Japan SMC fall test enginery pneumatic rodless cylinders for phone mention, drop drive source, match with precision double acting cylinder for reparations action, durable use; Can realize products such as phone repeatedly fall, to test the product by a certain height of falling resistance to impact;
phone fall due to adopt pneumatic components tester and autocratic control mode, greatly improve test speed and consistency; Using Japan panasonic LCD touch control panel + PLC programmable controller for action program; Independent count, reach the setting number automatically stop test
Above is the parameters of the model machine, if you have any special request, we will be in compliance with your request to you the most suitable design of the scheme.
If you need more detailed understanding of life testing machine, hot and cold impact test box, constant temperature and humidity box and other products material,
Please dial our service hot line: ; The welcome calls!
Can land products website: !
